SS Tubes Section, SS Pipes Section, SS Tubes, SS Pipes, SS Hollow Sections, SS Tube Hollow Sections, SS Square Hollow Sections, SS Rectangle Hollow Sections, SS Elliptical Hollow Sections
Products
 
Inspection & Quality Control
Following tests are normally carried out at Shree Tube
Flattening, Flare & Flange, Reverse Bend, Reverse flattening,
Tensile Strength, Hydraulic Testing, Crush Test.

Enquiry/Ordering Information
Material grade, NB Pipe Size or Outside diameter, Wall thickness,
Length - Random / Standard / Specific, Finish required,
Relevant Specification, Application/End use.
 
Request a Quote
Manufacturers of :
STAINLESS STEEL TUBES PIPES SECTION (Ranging From : Size - 6.35 mm OD to 165.00 mm OD)
AVAILABLE GRADES :- SS, 304, 304L, 316, 316L, 202, 430, 409L, CONFORMING TO ASTM. & OTHER INTERNATIONAL STANDARD
ALSO MANUFACTURERS OF :- HOLLOW SECTIONS SUCH AS SQUARE RECTANGLE AND ELLIPTICAL
 
Top
   
   
The Product Range, Finishes & Applications  
   

Grade Designation

E      L      E     M     E     N     T    %

Characteristics
TP
IS-6911
C Max.
Mn. Max.
Cr.
Ni
Other Elements
304
04Cr18Ni10
0.08
2.00
18.00/20.00
8.00/11.00
-
 Basic Steel for austentic stainless steel tubes, featuring  excellent  corrosion  resistance and weldability
304L
02Cr18Ni11
0.035
2.00
18.00/20.00
8.00/13.00
-
 A very low carbon steel, offering good intergranular corrosion  resistance  even in "as welded" condition.
310
10Cr25Ni18
0.15
2.00
24.00/26.00
19.00/22.00
-
 Excellent high temperature properties, with ductility and  weldability.
316
04Cr17Ni12Mo2
0.08
2.00
16.00/18.00
10.00/14.00
Mo2.00/3.00
 Molydenum gives this steel, higher 1 resistance to  non- oxidising  acides, as  well as good resistance to crevice  corrosion. It also  offers excellent high  temperature creep  characteristics.
316L
02Cr17Ni12Mo2
0.035
2.00
16.00/18.00
10.00/15.00
Mo2.00/3.00
 Lower corbon content provides better ' intergranular corrosion  resistance  than 316.
321
04Cr18Ni10Ti20
0.08
2.00
17.00/20.00
9.00/13.00
Ti=5xCmin
max. 0.70
 Titanium addition makes this steel a varbide stabilized type,  which  offers  improved intergranular corrosion resistance.  Used  in Heat  Exchanger and  superheater tubes for high  temperature  high  pressure boilers.
409
-
0.08
1.00
10.50/13.50
0.50 max.
Ti=6xCmin
max. 0.75
 A ferritic stainless steel offering resistance to chloride stress  corrosion.  Primarily used in automotive industry lor mufflers,  tail  pipes, etc.
410
12Cr13
0.15
1.00
11.50/13.50
0.50 max.
-
 A ferritic stainless steel offering good corrosion resistance and  machinability.
430
05Cr17
0.12
1.00
16.00/18.00
0.50 max.
-
 Good combination of corrosion resistance, useful mechanical  properties,  and  good formability.
   
 
   
Manufacturing Process
Top
Manufacturing Process
 
   
   
Valuable Products
Top
Valuable Products
Request a Quote
  
   
   
STANDARD WEIGHT CHART
Top
 
STANDARD WEIGHT CHART FOR STAINLESS STEEL WELDED TUBES
Outer Diameter
Wall Thickness in mms
Inches

mm
0.5
0.6
0.7
0.8
0.9
1.00
1.20
1.50
1.60
2.00
2.60
3.00
1/4
6.35
0.73
0.086
0.099
0.111
0.123
0.134
-
-
-
-
-
-
3/8
9.52
0.113
0.134
0.155
0.175
0.194
0.213
-
-
-
-
-
-
-
10.00
0.119
0.141
0.163
0.184
0.205
0.225
-
-
-
-
-
-
1/2
12.70
0.153
0.182
0.210
0.238
0.266
0.293
0.345
0.421
0.445
0.536
-
-
5/8
15.87
0.189
0.226
0.263
0.302
0.337
0.372
0.441
0.540
0.571

0.694
-
-
3/4
19.05
0.226
0.271
0.316
0.365
0.409
0.452
0.536
0.659
0.699
0.854
0.1.071
1.205
7/8
22.23
-
-
-
0.429
0.481
0.531
0.632
0.778
0.826
1.013
1.277
1.444
1
25.40
-
-
-
0.493
0.552
0.611
0.726
0.897
0.953
1.171
1.483
1.682
-
30.00
-
-
-
0.572
0.643
0.715
0.865
1.070
1.137
1.402
1.783
2.027
1.1/4
31.75
-
-
-
0.605
0.681
0.756
0.918
10136
1.207
1.489
1.897
2.159
1.1/2
38.10
-
-
-
0.727
0.818
0.908
1.108
1.374
1.462
1.807
2.310
2.636
1.3/4
44.4
-
-
-
-
-
-
0.299
1.613
1.716
2.125
2.724
3.112
-
45.00
-
-
-
-
-
-
1.315
1.633
1.738
2.153
2.759
3.154
2
50.8
-
-
-
-
-
-
1.490
1.851
1.970
2.443
3.137
3.589
2 1/2
63.5
-
-
-
-
-
-
1.871
2.328
2.479
3.079
3.963
4.542
3
76.2
-
-
-
-
-
-
-
2.805
2.988
3.714
4.790
5.497
3 1/2
88.9
-
-
-
-
-
-
-
3.281
3.496
4.350
5.616
6.450
4
101.7
-
-
-
-
-
-
-
3.758
4.005
4.986
6.443
7.404
   

MANUFACTURING RANGE PIPES

Size

Wall Thickness & Weight
Norminal Pipe Size in inch
Outside Diameter
Schedule - 5s
Schedule - 10s
Schedule - 40s
Schedule - 80s
(mm)
W.T. (mm.)
Wt.kg/Mt.
W.T. (mm).
Wt.Kg/Mt.
W.T. (mm)
Wt.kg/Mt.
W.T. (mm)
Wt.Kg/Mt.
1/4
13.72
1.24
0.387
1.65
0.498
2.24
0.643
3.02
0.808
3/8
17.15
1.24
0.493
1.65
0.640
2.31
0.857
3.20
1.116
1/2
21.34
1.65
0.812
2.11
1.014
2.77
1.286
3.73
1.642
3/4
26.67
1.65
1.032
2.11
1.300
2.87
1.708
3.91
2.225
1
33.40
1.65
1.310
2.77
2.121
3.38
2.537
4.55
3.282
1 1/4
42.16
1.65
1.671
2.77
2.728
3.56
3.435
4.85
4.524
1 1/2
48.26
1.65
1.923
2.77
3.150
3.68
4.101
5.08
5.484
2
60.33
1.65
2.421
2.77
3.986
3.91
5.515
5.54
7.588
2 1/2
73.03
2.11
3.741
3.05
5.336
5.16
8.756
7.01
11.570
3
88.90
2.11
4.578
3.05
6.546
5.49
11.448
7.62
15.484
3 1/2
101.60
2.11
5.248
3.05
7.514
5.74
13.756
8.08
18.891
4
114.30
2.11
5.918
3.05
8.483
6.02
16.296
8.56
22.628
 
   
   
The Product Range, Finishes & Applications
Top
   
Product Range
Tube : 6mm to 114.3 mm
Pipe : 1/8" NB to 4" NB
Sections : Square, Rectangular, Elliptical & Other as Per Customers requirement.

Finishes
•  As Welded
•  Welded & Externally Polished
•  Welded Cold drawn Annealed & Pickleds
•  Welded Cold drawn Annealed Pickled & Externally Polished
•  Other Finishes as per Customers requirement
Finishes & Applications
Finishes & Applications
     
Finishes & Applications
Finishes & Applications
   
 
 
Applications
•  Heat Exchangers : Such as Condensers, Evaporators, Heating Coils.
•  Fluid Piping : In Sugar Industtries, Breweries, Petrochemical Industries, Food Processing, Pharmaceuticals, Paper & Textile Industries.
•  Automobiles : Silencers, Catalytic Converters, Accessories.
•  Hospital & Kitchen equipment, Furniture & Interior Decoration.
•  Grneral Engineering Industries, Submersible pump casing.
   
ASTM Specifi- cations

Title
Outer DIArange (mm)
Outer DIA (mm)
Wall Thickness
(mm) %
Over
Under
Over
Under
A-213
Stainless Steel  Heat Exchanger Tubes
R
R
R
R
-
R
-
R
-
C
6.35 to 14.3
0.1 to 0.30
0.1 to 0.30
20
0
A-249
Stainless Steel Boilers, Super heat, Heat Exchangers & Condenser Tubes
R
R
R
R
R
-
R
R
O
C
6.35 to 14.3
0.1 to 0.38
0.1 to 0.38
10
10
A-269
Stainless Steel Tubing For General Service
R
-
R
R
R
R
-
R
O
C
6.35 to 14.3
0.13 to 0.38
0.13 to 0.38
10-15
10-15
A-270
Stainless Steel Sanitary Tubing
C
-
-
R
-
-
-
R
-
-
6.35 to 14.3
0.05 to 0.08
0.20 to 0.38
12.5
12.5
A-312
Stainless Steel Pipes
O
R
-
R
-
-
-
R
-
-
6.35 to 14.3
0.40 to 0.79
0.79
12.5
12.5
A-554
Stainless Steel Welded Mechanical Tubing
R
O
O
-
-
-
-
-
-
-
6.35 to 14.3
0.1 to 0.30
0.1 to 0.30
10
10
R=Required, O=Optional, C=Choice of purchaser